|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Impala Linear Corporation ILC7070 SOT-23 CMOS LDO Regulator with Shutdown General Description 150mA CMOS LDO regulator in a 5-lead SOT-23 package, featuring 120mV dropout at 100mA levels and nearly negligible dropout below 5mA. The part offers 2% precision as standard, yet draws only 5A of current in operation and drops to 0.5A in shutdown. The outputs offer short-circuit protection, and the shutdown pin has an internal pull-down which will disable the output if the pin is left floating. * * * * * * * Features All-CMOS design in 5-lead SOT-23 package 2% precision outputs Up to 150mA output current 120mV dropout at 100mA load Only 5A quiescent current at full load 0.5A quiescent current in shutdown Voltage options allow: 50mA 5V Regulator 50mA 5V to 3.3, 3.0, or 2.5V Convertor 150mA 3.3V or 3.0V to 2.5V Convertor Applications * * * * Battery-powered Equipment Reference voltage sources Portable Cameras and Video Recorders PDAs Ordering Information ILC7070HCM-25 ILC7070HCM-30 ILC7070HCM-33 ICL7070HCM-50 50mA 5V to 2.5V regulator, or 150mA 3.x to 2.5V regulator, High-level true Chip Enable 50mA 5V to 3.0V regulator, High-level true Chip Enable 50mA 5V to 3.3V regulator, High-level true Chip Enable 30mA 5V regulator, High-level true Chip Enable Block Diagram VIN SHORT-CIRCUIT PROTECT SHUTDOWN CONTROL REFERENCE VOLTAGE SOURCE Pin-Package Configurations VOUT VOUT 5 VSS 4 + VSS SOT-23-5 (TOP VIEW) 1 (NC) 2 VIN 3 CE CE Impala Linear Corporation ILC7070 1.1 (408) 574-3939 www.impalalinear.com Oct 1999 1 SOT-23 CMOS LDO Regulator with Shutdown Absolute Maximum Ratings (TA = 25C) Parameter Input Voltage CE Input Voltage Output Current Output Voltage Continuous Total Power Dissipation Operating Ambient Temperature Storage Temperature Symbol VIN VCE IOUT VOUT Pd(max) Topr Tstg Ratings 12 VSS-.0.3~VIN + 0.3 500 VSS-0.3~VIN + 0.3 150 -30~+80 -40~+125 Units V V mA V mW C C Note: IOUT must be less than Pd(max) / (VIN-VOUT) Electrical Characteristics ILC7070HCM-50 VOUT = 5.0V, TA =25C Parameter Output Voltage Maximum Output Current Load Stability Input/Output Voltage Differential Supply Current 1 Supply Current 2 Input Stability ISS1 ISS2 VOUT VIN * VOUT Input Voltage Output Voltage Temperature Characteristics CE Input Current CE ON Voltage CE OFF Voltage VIN VOUT Topr * VOUT IIH IIL CE(ON) CI(OFF) IOUT = 40mA -30C < Topr < 80C VIN = 6.0V, VCE = 2.5V VIN = 6.0V, VCE = 0 VIN = 6.0V VIN = 6.0V 2.5 0 2 4 0.1 VIN 0.7 V V 100 VIN = VCE = 6.0V VIN = 6.0V, VCE = open (Note 5) IOUT = 40mA 6.0V < VIN < 10.0V 10 V ppm/ C A 6 0.5 12 2.0 0.3 A A %/V Symbol VOUT IOUTmax VOUT Vdif Conditions IOUT = 40mA, VIN = 6.0V VIN = 6.0V, VOUT > 4.5V VIN = 6.0V, 1mA < IOUT < 100mA IOUT = 100mA, VOUT = VSET x 0.98 200 Min 4.90 125 80 300 Typ 5.0 Max 5.10 Units V mA mV mV Impala Linear Corporation ILC7070 1.1 (408) 574-3939 www.impalalinear.com Oct 1999 2 SOT-23 CMOS LDO Regulator with Shutdown Electrical Characteristics ILC7070HCM-25 VOUT = 2.5V, TA = 25C Parameter Output Voltage Maximum Output Current Load Stability Input/Output Voltage Differential Supply Current 1 Supply Current 2 Input Stability Input Voltage Output Voltage Temperature Characteristics CE Input Current CE ON Voltage CE OFF Voltage ISS1 ISS2 VOUT VIN * VOUT VIN VOUT Topr * VOUT IIH IIL CE(ON) CE(OFF) IOUT = 40mA -30C < Topr < 80C VIN = 3.5V, VCE = 3.5V VIN = 3.5V, VCE = 0V VIN = 3.5V VIN = 3.5V 2.5 0 2 4 0.1 VIN 0.7 V V A 100 VIN = VCE = 3.5V VIN = 3.5V, VCE = open (Note 5) IOUT = 40mA 3.5V< VIN < 10V 10.0 V ppm/C 5 0.5 0.2 10 2 0.3 A A %/V Symbol VOUT IOUTmax VOUT Vdif Conditions IOUT = 40mA, VIN = 3.5V VIN = 3.5V, VOUT > 2.25V VIN = 3.5V, 1mA < IOUT < 60mA IOUT = 60mA, VOUT = VSET x .98 Min 2.450 125 45 180 90 360 Typ 2.5 Max 2.55 Units V mA mV mV Note: 1. VOUT means the output voltage when "VOUT + 1.0V" is provided at the VIN pin while maintaining a certain IOUT value. 2. VIN1 is defined as the input value that is gradually decreased until the output value reaches VOUT x 98%. 3. Vdif is defined as "VIN1-VOUT." 4. IOUT: this is limited by continuous total power dissipation in the package. 5. When VCE is LOW or OPEN, the output is disabled. Note: CE pin is a CMOS input. Because of this, when the input voltage reaches VIN/2, a rush current will start to flow. Impala Linear Corporation ILC7070 1.1 (408) 574-3939 www.impalalinear.com Oct 1999 3 SOT-23 CMOS LDO Regulator with Shutdown Typical Performance Characteristics General conditions for all curves OUTPUT VOLTAGE vs OUTPUT CURRENT ILC7070HCM-30 3.1 5.1 OUTPUT VOLTAGE vs OUTPUT CURRENT ILC7070HCM-50 VIN = 6.0V OUTPUT VOLTAGE VOUT(V) OUTPUT VOLTAGE VOUT(V) VIN = 4.0V 5.0 Topr = -30C 80C 4.9 25C 3.0 Topr = -30C 80C 2.9 25C 4.8 2.8 0 20 40 60 80 100 120 140 160 0 40 80 120 160 200 OUTPUT CURRENT IOUT (mA) OUTPUT CURRENT IOUT (mA) OUTPUT VOLTAGE vs INPUT VOLTAGE ILC7070HCM-30 3.2 Topr = 25C 5.1 OUTPUT VOLTAGE vs INPUT VOLTAGE ILC7070HCM-50 Topr = 25C OUTPUT VOLTAGE VOUT(V) 3.0 IOUT = 1mA 2.8 40mA 2.6 10mA 2.4 OUTPUT VOLTAGE VOUT(V) 5.0 IOUT = 1mA 40mA 4.6 10mA 4.4 4.8 2.2 2.5 3.0 3.5 4.2 4.5 5.0 5.5 INPUT VOLTAGE VIN (V) INPUT VOLTAGE VIN (V) OUTPUT VOLTAGE vs INPUT VOLTAGE ILC7070HCM-30 3.04 OUTPUT VOLTAGE vs INPUT VOLTAGE ILC7070HCM-50 5.05 Topr = 25C 5.04 5.03 IOUT = 1mA 5.02 5.01 5.00 4.99 4.98 OUTPUT VOLTAGE VOUT(V) Topr = 25C 3.02 IOUT = 1mA 3.01 3.00 2.99 2.98 2.97 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 OUTPUT VOLTAGE VOUT(V) 3.03 5.0 6.0 7.0 8.0 9.0 10 INPUT VOLTAGE VIN (V) INPUT VOLTAGE VIN (V) VDO vs ILC7070HCM-30 0.6 0.5 OUTPUT CURRENT 1.0 0.8 Topr = 25C 0.6 VDO vs ILC7070HCM-50 OUTPUT CURRENT 0.4 80C Topr = 25C 0.4 VDO(V) 0.3 80C 0.2 0.0 -0.2 0 20 40 60 80 100 120 140 160 VDO(V) -30C 0.2 -30C 0.0 -0.2 -0.4 0 40 80 120 160 200 OUTPUT CURRENT IOUT (mA) OUTPUT CURRENT IOUT (mA) Impala Linear Corporation ILC7070 1.1 (408) 574-3939 www.impalalinear.com Oct 1999 4 SOT-23 CMOS LDO Regulator with Shutdown Electrical Characteristics General conditions for all curves OUTPUT VOLTAGE vs TEMPERATURE ILC7070HCM-50 5.02 IOUT = 10mA VIN = 6.0V IOUT = 10mA OUTPUT VOLTAGE vs TEMPERATURE ILC7070HCM-30 3.01 OUTPUT VOLTAGE VOUT(V) VIN = 4.0V 3.00 2.99 OUTPUT VOLTAGE VOUT(V) 5.01 5.00 4.99 40mA 2.98 2.97 2.96 2.95 2.94 -40 -20 0 20 40 60 80 100 40mA 4.98 4.97 4.96 4.95 -40 -20 0 20 40 60 80 100 Topr (C) Topr (C) LINE TRANSIENT RESPONSE ILC7070HCM-50 8.0 7.5 7.0 6.5 Input Voltage IOUT = 1mA 8.0 7.5 LINE TRANSIENT RESPONSE ILC7070HCM-50 IOUT = 10mA Input Voltage 7.0 6.5 (V) 6.0 5.5 Output Voltage 5.0 4.5 4.0 -1 0 1 2 3 (V) 6.0 5.5 Output Voltage 5.0 4.5 4.0 -1 0 1 2 3 TIME (ms) TIME (ms) Impala Linear Corporation ILC7070 1.1 (408) 574-3939 www.impalalinear.com Oct 1999 5 SOT-23 CMOS LDO Regulator with Shutdown Package Outline Dimensions 0.122 (3.10) 0.106 (2.70) 0.071 (1.80) 0.055 (1.40) 0.118 (3.00) 0.102 (2.60) PIN 1 0.037 (0.95) BSC 0.055 (1.40) 0.0393 (1.0) 0.057 (1.45) 0.035 (0.90) 10 0 0.0217 (0.55) 0.0138 (0.35) 0.0059 (0.15) 0.0019 (0.05) 0.019 (0.50) 0.0138 (0.35) SEATING PLANE 0.0078 (0.2) 0.0031 (0.08) Devices sold by Impala Linear Corporation are covered by the warranty and patent indemnification provisions appearing in its Terms of Sale only. Impala Linear Corporation makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. Impala Linear Corporation makes no warranty of merchantability or fitness for any purpose. Impala Linear Corporation reserves the right to discontinue production and change specifications and prices at any time and without notice. This product is intended for use in normal commercial applications. Applications requiring an extended temperature range, unusual environmental requirements, or high reliability applications, such as military and aerospace, are specifically not recommended without additional processing by Impala Linear Corporation. Impala Linear Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in an Impala Linear Corporation product. No other circuits, patents, licenses are implied. Life Support Policy Impala Linear Corporation's products are not authorized for use as critical components in life support devices or systems. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support dice or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Impala Linear Corporation ILC7070 1.1 (408) 574-3939 www.impalalinear.com Oct 1999 6 |
Price & Availability of ILC7070HCM-50 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |